Shape memory crosslinked polyurethanes containing thermoreversible Diels‐Alder couplings

Crosslinked polyurethanes (PUs) containing irreversible (allophanate) and reversible Diels‐Alder chemical bonds were synthesized using various diisocyanates (methylene diphenyl diisocyanate MDI, 1,6‐hexamethylenediisocyanate HDI) and poly(?‐caprolactone) ((PCL) with different molecular weights (M_n = 10 kg/mol, 25 kg/mol, 50 kg/mol) as diol component. The melting/crystallization of PCL and the reversible DA bonds acted as temperature‐activated switches for shape memory performances, while allophanate network provided the permanent crosslinks for these PUs. The reversible DA bonds were obtained by the reaction of diisocyanate‐ended prepolymers with furfurylamine (FA) followed by the addition of bismaleimide (BMI). The permanent crosslinks between the linear chains containing DA bonds were achieved using additional amounts of diisocyanates (MDI or HDI). The above reaction path was supported by infrared spectroscopic results and swelling experiments. Tensile mechanical and shape memory properties in tension of the PUs were determined and discussed as a function of composition and crosslink densities deduced from swelling and dynamic mechanical analysis. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44145.     

One-pot synthesis of gelatin-based,slow-release polymer microparticles containing silver nanoparticles and their application in anti-fouling paint

Gelatinous polymer matrix microparticles containing silver nanoparticles (AgNPs) were prepared by a novel method to obtain quasi non-swelling anti-fouling paint additives with slow-release characteristics. A w/o type dispersion were elaborated with the aqueous phase of gelatin, urea, silver-nitrate and formaldehyde dispersed in linseed oil. Gelatin was cross-linked by formaldehyde, together with urea for limiting the swelling of the product. Silver-nitrate was reduced with the assistance of gelatin and formaldehyde into homogenously dispersed AgNPs. The microparticles and embedded AgNPs were visualized by scanning and transmission electronmicroscopy. Encapsulated AgNPs with ∼18 nm crystallite size were identified by X-ray powder diffraction. Characterization of gelatin–urea–formaldehyde polymer matrices was carried out by attenuated total reflectance FTIR spectroscopy. Silver dissolution from microparticles and paints with AgNP-containing microparticles was measured by inductively coupled plasma spectrometer and resulted in highly sustained release, compared to unmodified gelatin microparticles and paints containing uncapsulated silver salts. A 7-month-long fouling experiment run in natural sweetwater media showed that solvent-based acrylic paint with AgNPs-containing gelatinous microparticles as additives offered resistance against biofouling at low Ag-release ratio.     

Structural entropy in detecting background patterns of AFM images

Structural entropy was developed for detecting the type of localization in charge distributions on a finite grid, especially in mesoscopic electronic systems. However, it is possible to detect and analyze superstructures, i.e., topologies consisting of more structures with different types of localization properties. In the definition of the structural entropy, the von Neumann entropy of the system is divided into two parts: first, the extension entropy, which is simply the logarithm of the occupation number; the second part is the structural entropy. On a structural entropy versus logarithm of the spatial filling factor map, the different types of localizations follow different, well-characterized curves. Spatial filling factor measures the percentage of the “filled” (i.e., high intensity) pixels of the image.An atomic force microscopy (AFM) image can be interpreted as some kind of charge distribution on a grid: after normalization, the darkness (or lightness) of the pixels fulfills all the necessary conditions. AFM image artifacts can be detected by plotting the structural entropy versus the logarithm of the spatial filling factor maps of the images. Not only the type of an added large-scale Gaussian, parabolic, exponential, or other function can be identified, but also by careful study of the curves belonging to the structures, the parameters can be detected, too.     

Photo-induced transformations in amorphous chalcogenide nano-multilayers

Photo-stimulated interdiffusion in a-Se/As₂S₃ amorphous chalcogenide nano-multilayers (ANML) is known as a useful method for amplitude-phase optical relief formation besides the known amorphous–amorphous or amorphous–crystalline photo-induced structural transformations (PST) in homogeneous chalcogenide layers, but it has a relatively narrow sensitivity spectral range and small amplitude modulation. Experimental evidences of improvement of optical recording processes were obtained in Te-, Bi-, Sb-containing nano-layered structures based on As₂S₃ matrix. The influence of nano-structuring and combination of components on the sensitivity, type of the recorded relief is discussed.     

Sensitivity analysis of a directional potential drop sensor for creep monitoring

Recent research efforts indicated that directional potential drop (PD) measurements could be exploited for in-situ creep monitoring. The present work investigates the sensitivity of such measurements with a square-electrode configuration to geometrical and material variations caused by creep. This measurement technique is based on a modification of the conventional PD technique as it measures simultaneously two resistance values in orthogonal directions. Under uniaxial stress condition, the ratio of the lateral and axial resistances is roughly proportional to the applied strain. Experimental tests showed that small anisotropic changes in the resistance ratio caused by directional effects of creep can be distinguished from potentially far larger isotropic changes caused by non-directional reversible and irreversible thermal effects. The sensitivity of the square-electrode PD sensor to geometrical and material variations was analyzed separately and the analytical predictions were validated by experimental tests in both cases. The directional PD technique was found to exhibit high sensitivity that allows the detection of elastic and plastic strains as low as 0.05%. Additional experimental results from an accelerated 400-hour creep test are presented to demonstrate the feasibility of this technique to monitor creep degradation in 304 stainless steel at 600 °C.     

Within-school social comparison: How students perceive the standing of their class predicts academic self-concept.

Results from prior research indicate that a student’s academic self-concept is negatively influenced by the achievement of others in his or her school (a frame of reference effect) and that this negative frame of reference effect is not or only slightly reduced by the quality, standing, or prestige of the track or school attended (a “reflected glory” effect). Going beyond prior studies, the present research used both between-school and within-school approaches to investigate frame of reference and reflected glory effects in education, incorporating students’ own perceptions of the standing of their school and class. Multilevel analyses were performed with data from 3 large-scale assessments with 4,810, 1,502, and 4,247 students, respectively. Findings from all 3 studies showed that, given comparable individual achievement, placement in high-achieving learning groups was associated with comparatively low academic self-concepts. However, students’ academic self-concept was not merely a reflection of their relative position within the class but also substantively associated with their individual and shared perceptions of the class’s standing. Moreover, the negative effects of being placed in high-achieving learning groups were weaker for high-achieving students. Overall, the studies support both educational and social psychology theorizing on social comparison. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The Irritant Effects of Pharmaceutically Applied Surfactants

Dermal or transdermal medication may lead to irritant contact dermatitis. However, little information is available on the irritant effect of surfactants which are applied in topical formulations. Our aim was to examine the irritant effect of the most frequent compounds in topical products. A murine model was applied. The following compounds were examined: sodium lauryl sulphate (SLS), polyethoxylated (40EO) hydrogenated castor oil and sucrose laurate. SLS led to severe erythema, increase in transepidermal water loss (TEWL) and induced necrosis and accumulation of neutrophylic granulocytes and lymphocytes. Exposure to sucrose laurate resulted in an elevation of TEWL, but histology did not reveal impairment of the skin structure. Application of polyethoxylated (40EO) hydrogenated castor oil was not accompanied by tissue damage. Special attention should be paid to the irritant effect of SLS. Polyethoxylated (40EO) hydrogenated castor oil seems to be a non-irritant agent and sucrose laurate is also a promising candidate for application in topical preparations.     

Honoring Dr. Bimal K. Bose [Tributes]

As a leading figure in the broad area of industrial electronics, Dr. Bimal K. Bose has made outstanding contributions in the fields of power electronics and motor drives. He is an innovator, educator, and mentor to many members of the industry all over the world. As part of this special issue, this column pays tribute to his lifetime achievements.